680B+ is a Synchronous Rectification and microprocessor controlled high performance rapid charger/discharger/balancer for NIMH/NICD, LI-ION, LIPO, LIFE and Lead Acid battery packs with cell balancer..
Synchronous Rectification--- a advanced charging technology, The Chargery Power is the first manufacturer to use the technology to design balance charger --- assure up to 95% power transfer efficiency. Not only save the power but only make the charger size is only 140*98*25(mm), smaller body (350g) make the charger easy to use and convenient to take.
Charge current is up to 10A, 210W max. Discharge current is up to 7A, 30W MAX. For 1 to 6S li-on/LiPo/LiFe, 1-17S NiMh/NiCd, 2-24V lead acid (Pb). Charge 1 pack of 1-6S or 2 Packs of 3S or 3 packs of 2S simultaneously without identical battery brand and capacity restricted.
Built-in cell balancer---Perfect balancing the Li-ion, Li-Poly and LiFe Batteries
The built-in balancer automatically detect and balance each cell voltage of the 1 to 10 cells in series. It monitors the voltages of each cell during the charge process to equalize the cell voltage within 10mV.
Smart cooling fan
when the internal temperature reaches the preset limit, the fan will start automatically.
Unique Li-ion/LiPo/LiFe Monitor program
You can discharge your battery at any current with external load, the program will monitor the cell voltage, battery temperature, time and so on, in case of any unexpected occasions, 680B+ will alarm and protect the cell and battery form over discharged..
The processor monitors the temperature of the battery being charged during the process. For safety reason, the charger can stop the process at high temperature by your set up.
Back-light LCD screen
You can adjust the brightness of LCD display
Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat, intelligent cooling fan can start automatically when the internal temperature reach 40⊥ .
Dual DC Input
680B+ design dual DC power supply. it is convenient to connect to the any DC power, for the different power adapter(12V 1-20A), 680B+ can adjust the charging power and current automatically to protect the adapter.
The 680B+ can charge your battery pack at up to 10 Amps current. 2*3S packs or 3*2S packs can be charged simultaneously.
as far as a 5.0AH 22.2V battery pack or two 5.0AH 11.1V packs, the charging time is also 30-50min at most, the charge current will reach 2C or higher.
The 680B+ has all kinds of protection for reversed polarity(input or output), low input voltage, battery temp. and charging capacity.
And the charger will adjust the charge power upon the input power automatically, if the internal temperature is larger than the limit, 680B+ will decrease the charge power to protect the charger, when the temperature goes down to under the limit, the charge power will be resumed.
2 working mode assure your battery safety and rapidly charge.
- if you connect only the output lead to your battery pack. The unit charges your pack quickly. If your battery is balanced before charge, the feature is very useful for you to save your time. A 6S pack with 5AH will be charged fully in 40 min.
- As a balance charger, if the output lead and balance port are be connected at the same time, the 680B+ will charge and balance your pack quickly. it is the best for large capacity battery pack to do so, because of extending the battery＊s cycle life and safety.
- Input Voltage/Current: DC 10-18V,20A
- Charge Power: 210W MAX.
- Battery Types: 1-6S lipo/li-ion/liFe, 1-17S NiMh/NiCd and 2-24V lead acid (Pb)
- Charge Current: 0.05-10.0A max.
- Discharge power: 20w max. @ input voltage > 13.5V
- Discharge current: 0.05-7.0A
- Balancing current: 400mA
- Balance Accuracy: < 10mV
- Cycle times:1-10
- Battery memories:1-10 model
- Operating Temperature: 0~40⊥
- Storage Temperature: -20~85⊥
- Operating Relative Humidity: 5~95%RH
- Dimension: 134*83*25(mm, L*W*H)
- Case Material : Al alloy
- Balance port: JST-XH connector for 2S, 3S, 4S, 5S, 6S battery,
- Adapter Board: CCB-7TPQF for TP, FP, Polyquest, Hyperion battery, CCB-7N-EH for Kokam battery
- Adapter wire: CEHP-7X
- weight: 350g(without cables)
Safety Certification: CE
680B+ is fully committed to compliance with the European Union's RoHS directive.
Download User manual Size=678K
1 unit of Chargery Power 680B+ Multifunction Balance Charger
1 pc. CEH-7X conversion wire
1 pc. CW-9 temperture sensor
1 pc. CW2 input power lead
1 pc. CW3 4mm banana with dean connector
1 pair CW15 inut power alligator clip
1 pc. English user manual CD
1 pc. CCB-723XH conversion board for 3*2S and 2*3S Chargery Power, Kokam, Graupner, Align and Dualsky battery packs
1 pc. CCB-7TPQF conversion board for 2S, 3S, 4S, 5S and 6S Thunder Power, Flight Power, Polyquest and Hyperion battery packs.
1 pc. CCB-723TPQF conversion board for 3*2S and 2*3S Thunder Power, Flight Power, Polyquest and Hyperion battery packs.
12 months manufacturer warranty