Pentium-80A is ESC product in "PENTIUM" series. Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to its default setting.
- Output: Continues 80A, Burst 100A up to 10 Secs.
- Sustaining Voltage: 7.4V --- 22.2V (2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery)
- BEC Output - 5W / 3A (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
- Weight: 62g
2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
2.4 Full Protection Features: Low voltage cutoff protection / over-heat protection / throttle signal lost protection.
3.1 Military standard capacitor with extreme low resistance is used at voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
3.2 Extreme low resistance PCB is used at power output section to get the best current endurance capability.
3.3 Big heat sink has a very good cooling effect.
3.4 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability
3.5 Compatible with Hobbywing's Program Card.